Faresin Industries at Bauma 2025: Three New Solutions for a More Efficient and Sustainable Worksite

Breganze (Italy), April 7, 2025 – At Bauma 2025, Faresin Industries is presenting three important new products that reinforce its commitment to innovation and sustainability in the telehandler industry: the new series FS Middle, the compact and versatile FS 6.26, and the expanded range of Full Electric.

FS Middle: Versatility and Technology for Modern Construction.

The series FS Middle represents the second generation of the FS line, designed to offer high performance in construction and industrial settings. With telescopic booms reaching heights from 7 to 10 meters and load capacities from 3.5 to 4.5 tons, these models combine compactness and power.

Equipped with Deutz Stage V engines from 55 to 100 kW and continuously variable HVTronic transmissions, FS Middle lifts provide energy efficiency and smooth movements. The completely redesigned cab offers all-around visibility, ergonomic controls and 5″ or 7″ color displays for intuitive control of functions.

Innovations include the S420 steel boom with double-C structure, intelligent functions for limiting height movements, electro-proportional control of controls, and Ecofast-E system for smooth movements even at low speeds.

FS 6.26: Uncompromised Compactness and Performance

The new FS 6.26 is the most compact telehandler in the Faresin range, ideal for operating in tight spaces without sacrificing power and versatility. With a height of less than 2 meters, width of 1.92 meters and turning radius of 3.25 meters, it is perfect for applications in urban environments, greenhouses and construction sites with limited access.

Equipped with an electronic stepless transmission from 0 to 30 km/h, it offers three driving modes: “automotive” for direct engine response, “EcoSmart” to optimize fuel consumption and “creeper” for precision work. The hydraulic system, with an 80 l/min pump at 210 bar and flow sharing technology, enables simultaneous and smooth boom movements.

The spacious and ergonomic cab includes a 5-inch color display, electro-proportional joystick with integrated travel shuttle and stability indicators to ensure operator safety and comfort.

Range Full Electric: Sustainability and Performance for the Future

Faresin expands its range Full Electric, confirming its leadership in electrification of telehandlers. Following the success of the 6.26 Full Electric, the company presents the series Big Range, consisting of the 14.42, 17.40 and 17.45 models, with lifting heights up to 17 meters and capacities up to 4.5 tons.

These models offer performance comparable to diesel versions, thanks to 51 kW electric motors for traction and 23 kW for hydraulic services, high-capacity batteries of up to 45 kWh, and operating range of up to 8 hours. The energy recovery system during braking and accelerator release increases efficiency and range.

The cab, shared with the 6.26 Full Electric, offers a comfortable and technologically advanced working environment with color LED displays and intuitive controls.

With these innovations, Faresin Industries once again demonstrates its ability to anticipate market needs, offering solutions that combine innovation, efficiency and sustainability to meet the worksite challenges of the future.

Picture of Giulio

Giulio

Related articles
Share on:
Categories
EU+PONIC_Riaccendiamo_lo_sviluppo+MIMIT

ERAMIX - Electric and Robot driven mixing technologies for the future sustainable agriculture

Nella proposta progettuale il team R&D Faresin sarà impegnato in attività di ricerca industriale e sviluppo sperimentale. Le stesse saranno portate a termine mediante l’apporto intellettuale di tecnici interni all’azienda, avvalendosi del supporto di specialisti esterni, tra gli altri: Service Group R&D, dell’Università degli studi di Padova. Il progetto è stato sostenuto dal Ministero delle Imprese e del Made in Italy attraverso la concessione di un contributo diretto alla spesa pari a 1.960.732 € e di un finanziamento a tasso agevolato pari a 1.386.222 €.

Puntualmente, le finalità di progetto si riassumono nei seguenti punti:

• massimizzazione del benessere dell’animale: precision feeding, benessere dell’ambiente stalla;
• elettrificazione dei sistemi di propulsione per carri miscelatori;
• farm del futuro:
• sviluppo della guida autonoma per i carri di miscelazione
• sviluppo di un MES per la gestione del processo: precision farming
• implementazione del calcolo della carbon footprint di processo in real-time analizzata in tempo reale e riferita al litro di latte prodotto

Le attività prevedranno tutti gli step necessari alla realizzazione di una nuova gamma di prodotto: dalla fattibilità, alla progettazione, alla realizzazione e test, una pluralità di work packages sono volti alla realizzazione e validazione di prototipi di carro miscelatore, full electric, anche con guida autonoma e con features digitali che porteranno alla rivoluzione delle attuali pratiche operative del settore di riferimento.

Infine, il progetto rispetta il principio DNSH (“Do No Significant Harm”), di cui all’articolo 17 del regolamento (UE) 2020/852 del Parlamento europeo e del Consiglio, del 18 giugno 2020. La quantificazione dell’impatto ambientale associato alle soluzioni sviluppate nel corso del progetto agevolato viene condotta facendo ricorso a strumenti di LCA (Life Cycle Assessment) grazie alla collaborazione con la società Service Group R&D.